Mounting the enclosure, Enc8tm-10 – NOSHOK NEMA 4 Enclosures User Manual
Page 4
MOUNTING THE ENCLOSURE
1. Self-stick foot pads may be applied to the features on the bottom of the enclosure to
protect the mounting surface.
2. To securely mount the enclosure, attach the adjustable mounting brackets to the
enclosure using the plastic washers and screws. Mounting brackets may be attached to
the top or bottom of the enclosure.
3. Secure the adjustable mounting brackets to mounting location with the screws provided.
ENC8TM-10
LIMITED WARRANTY
NOSHOK’S One Year Warranty applies to these products.
NOSHOK warrants these products to be free from defects
in materials and workmanship, to remain within catalogued
accuracy specifications, and to operate within the catalogued
performance specifications. Limitations which apply are:
These units must be operated within the catalogued environmental
and application parameters. Determination of failure will be made
by NOSHOK, Inc.’s equipment and personnel or a certified test
facility specializing in this type of evaluation.
CORPORATE HEADQUARTERS
1010 West Bagley Road · Berea, Ohio 44017
Ph 440-243-0888 · Fax 440.243.3472
E-mail: [email protected]
Web: www.noshok.com