Martel Electronics BEZ-700-IP - Manual (Page 2)

Notes: On some panel instruments it may be easier to configure links and calibrate the product prior to fitting the instrument and BEZ 700-IP into the
panel. Always observe safety warnings on the Panel Instrument datasheet. Do not allow connections to touch the metal bezel, as this may adversely
affect product safety or stop the panel instrument from functioning correctly.
A solder tag is provided. However, it is the responsibility of the installer to ensure that any earth bonding complies with local regulations.
Page 2 of 2 www.lascarelectronics.com
MOUNTING METHOD
Insulating
Washer
Nut
Panel
Instrument
Shake-proof
Washer
Solder Tag
2 3 1
Seal
(add Silicone Grease)
Insulating
Washer
Nut
Panel
Instrument
Shake-proof
Washer
Solder Tag
2 3 1
Seal
(add Silicone Grease)
Notes: On some panel instruments it may be easier to configure links and calibrate the product prior to fitting the instrument and BEZ 700-IP into the
panel. Always observe safety warnings on the Panel Instrument datasheet. Do not allow connections to touch the metal bezel, as this may adversely
affect product safety or stop the panel instrument from functioning correctly.
A solder tag is provided. However, it is the responsibility of the installer to ensure that any earth bonding complies with local regulations.
Page 2 of 2 www.lascarelectronics.com
MOUNTING METHOD
To ensure integrity of waterproofing, avoid overtightening nuts
retaining bezel clamp bracket, as this can distort the seal.
To ensure integrity of waterproofing, avoid overtightening nuts
retaining bezel clamp bracket, as this can distort the seal.
PO Box 770, Londonderry, NH 03053 1-800-821-0023
PO Box 770, Londonderry, NH 03053 1-800-821-0023