Warranty – Martel Electronics MECP10K User Manual
Page 4
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-1433 800-821-0023
Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Drive
Derry, NH 03038
0219406 Rev D 10/11
stored with the operating fluid in the reservoir. It is recommended
that the fluid being utilized be identified so that another potential
operator of the MECP10K will be advised.
WARNING:
• Never use the MECP10K to generate pressure
greater than 10,000 PSI/700 Bar
• Never connect the MECP10K to a pressure source
• The 1/8” FNPT Port should only be used with optional
Relief Valve P/N 1010050
WARRANTY
Martel Electronics Corporation warrants the MECP10K Hydraulic Hand
Pump against defects in materials and workmanship for a period of twelve
(12) months after date of sale. An invoice may be required as proof of
purchase for warranty claims. Damage due to contamination or other
misuse is not covered under this warranty.
To obtain warranty or non-warranty service download an RMA form from
www.martelcalibrators.com/pdf/martel_rma_form.pdf. Complete the form
and include it with the shipment. Send the product pre-paid using a
trackable shipment method to the address on the form. Martel is not
responsible for goods sent by postal mail without tracking information.