Martel Electronics T150 - Manual (Page 3)

General Description
The T150 Frequency calibrator is designed to
be a high accuracy, simple to use frequency
standard for calibrating process control
instrumentation. The T150 can generate or read
frequencies ranging from 1 count per minute to
100 KHz allowing it to be used for a wide range
of flow measuring instrumentation.
When operated in the source mode, the user
can quickly step the output in 10% of range
increments or make smaller changes using the
scroll keys.
Customer Service
Corporate Office:
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-1433 800-821-0023
Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Drive
Derry, NH 03038
Installation
Unpacking
Remove the Packing List and verify that all
equipment has been received. If there are any
questions about the shipment, please call
Martel at 1-800-821-0023 or email
[email protected].
When you receive the shipment, inspect the
container and equipment for any signs of
damage. Note any evidence of rough handling
in transit. Immediately report any damage to the
shipping agent.
1