Martel Electronics BetaGauge PI PRO - Manual (Page 3)

1
1. Introduction
The BetaGauge PI combines the high accuracy of digital electronics
with the convenience and ease of use of an analog test gauge.
Accurate to ± 0.05% FS, the BetaGauge PI can be used as a
calibration reference, or in any application where high accuracy
pressure measurement is required.
Many user configurable functions have been designed into the
BetaGauge PI including sampling rate, TARE, damping, auto shut off,
and min-max. Once the gauge is configured, settings can be locked
and password protected to prevent unauthorized changes to
configuration.
1.1 Customer Service
Corporate Office:
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-1433 800-821-0023 Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Drive
Derry, NH 03038
1.2 Standard Equipment
Check to see that your BetaGauge PI has arrived intact. Batteries are
factory installed unless you have purchased the optional 24V powered
version, in which case batteries are not supplied or installed. Save the
packing materials at least until you have verified that there is no
concealed damage.
1.3 Safety information
A Warning identifies conditions and actions that pose hazard(s) to the
user; a Caution identifies conditions and actions that may damage the
Calibrator or the equipment under test.