KYORITSU 2434 - Manual (Page 4)

Measuring method: Dual Integration
Display: Liquid crystal display with maximum reading
of 3999
Low battery warning: "BATT" mark appears on the display
Overrange Indication: "OL" appears on the display when upper limit
of measuring range is exceeded
Response Time: Approx. 2 seconds
Sample Rate: Approx. 2.5 times per second
Accuracy-insured 23℃±5℃, relative humidity 85% or less
Temperature and (without condensation)
Humidity Ranges:
Operating Temperature 0-40℃, relative humidity 85% or less
and Humidity Ranges:
(without condensation)
Storage Temperature -20-60℃, relative humidity 85% or less
and Humidity Ranges: (without condensation)
Power Source: Two 1.5V R03 (UM-4) batteries
Current Consumption: Approx. 4mA
Measurement Time: Approx. 150 hours
Sleep Function: Automatically powered down in about 10
minutes after the last switch operation
Safety Standard: IEC 61010-1, IEC 61010-2-032
over-voltage CAT.Ⅲ 300V, pollution degree 2
IEC 61326 (EMC)
Overload Protection: 120Arms max. for 10 seconds
Withstand Voltage: 3700Vrms (50/60Hz) for 1 minute between
metal part of transformer jaws and housing
case (except transformer jaw case)
Insulation Resistance: 10MΩ or greater at 1000V between metal
part of transformer jaws and housing case
(except transformer jaw case)
Conductor Size: Approx. 28mm in diameter max.
Dimensions: 169(L)×75(W)×40(D)mm
Weight: Approx. 220g including batteries
Accessories: Two R03 (UM-4) batteries
Carrying case Model 9052
Instruction manual
Optional Accessories: Multi-Tran Model 8004 and 8008
4. INSTRUMENT LAYOUT
Transform Jaws
Trigger
Range Selector Switch
Hand Strap
Display
Frequency Selector Button
Data Hold Button
●ＬＣＤ
Low Battery Warning
Frequency Response :
Wide
Frequency Response :
50/60Hz
Data Hold Indication
Unit