KYORITSU 2413R - Manual (Page 10)

― 8 ―
Operating System ：Dual Integration
Display ：Field effect 3・1/2 digit liquid crystal
display with maximum count of 1999
Range selection ：Manual
Overrange Indication ：“1”is displayed on the highest digit
except for 1000A AC range.
Response Time ：Approx. 3 seconds
Sample Rate ：Approx. 3 times per second
Data Hold ：Available on all ranges
Location for use ：Indoor use, Altitude up to 2000m
Temperature ＆ Humidity ：23℃ ± ５℃, relative humidity up to 85%
for Specified Accuracy without condensation
Storage Temperature ：-20∼60℃, relative humidity up to 80%
& Humidity without condensation
Operating Temperature ：0∼40℃,relative humidity up to 85%
& Humidity without condensation
Power Source ：One 6 F22 or equivalent battery
Low Battery Warning ：“ ”symbol is shown on the display.
Current Consumption ：Approx. 5mA max.(use Back Light:8mA max.)
Standard(Safety) ：IEC61010-1
IEC61010-2-032
CAT. Ⅲ,AC300V,Pollution degree 2
(EMC) ：EN 61326
・EN 55022
・EN 61000-4-2 (performance criterion B)
・EN 61000-4-3 (performance criterion B)
Overload Protection ：1500A AC max for 1 minute
Withstand Voltage ：3700V AC for 1 minute between
electrical circuit and housing cases
Insulation Resistance ：50MΩ or greater at 1000V between
electrical circuits and housing cases or
metal parts of jaws
Conductor Size ：Approx. 68mm diameter max.
Dimensions/Weight ：250(L) × 130(W) × 50(D)mm.
Approx. 600g (including battery)
Accessories ：6F22 battery
Carrying case
Instruction manual
Optional Accessories ：Model 7073 two-way output cord
Peak Hold ：Response time selectable from approx.
10ms and 100ms.
1/
√2 of the peak current is displayed,
which means an RMS reading will be
obtained when current having sinusoidal
waveform in measured.
Peak hold reading varies by approximately
± 1% max of full scale in the first minute at
23 ℃ ± ５℃ and relative humidity of 75%
without condensation.