KYORITSU 2413F - Manual (Page 10)

― 8 ―
Power Source ：One 6 F22 or equivalent battery
Low Battery Warning ：“B”symbol is shown on the display.
Current Consumption ：Approx. 5mA max.
Standard(Safety) ：IEC61010-1
IEC61010-2-032
CAT. Ⅲ,AC300V,Pollution degree 2
(EMC) ：IEC61326
EN55022
Overload Protection ：1500A AC max for 1 minute
Withstand Voltage ：3700V AC for 1 minute between
electrical circuit and housing cases
Insulation Resistance ：10MΩ or greater at 1000V between
electrical circuits and housing cases or
metal parts of jaws
Conductor Size ：Approx. 68mm diameter max.
Dimensions/Weight ：250(L)×130(W)×50(D)mm×. 570ｇ
（including battery ）
Accessories ：6F22 battery
Carrying case
Instruction manual
Optional Accessories ：Model 7073 two-way output cord
Peak Hold ：Response time selectable from approx.
10ms and 100ms.
1/
√2 of the peak current is displayed,
which means an RMS reading will be
obtained when current having
sinusoidal waveform in measured.
Peak hold reading varies by
approximately
±1% max of full scale
in the first minute at 23 ℃±10℃ and
relative humidity of 75% without
condensation.