KROHNE IFC 110 Converter HART V0201 - Manual (Page 3)

KROHNE Messtechnik GmbH & Co. KG · Ludwig-Krohne-Str. 5 D-47058 Duisburg 3/15
Tel.: 0203-301 0 Fax: 0203-301 389 · e-mail: [email protected]
Supplementary Installation and Operating Instructions IFC110 HART
HC275, AMS, PDM
1 General Information
The IFC110 is a "four-wire" transmitter with 4...20mA current output and HART

capability. It is available with active
current output or active/passive current output.
General characteristics of the IFC110 HART

interface:
•
Multidrop Mode is supported
•
Burst Mode is not supported
Electrical connection: Refer to sections 2.1, 2.2, 2.6 of the “Installation and Operating Instructions Electromagnetic
flowmeters ALTOFLUX IFC 110 F” (KROHNE).
There are two ways of using the HART

communication:
a) As a point-to-point connection between the IFC110 and the HART

master equipment.
Point-to-Point Analog/Digital Mode
4 20
mA
4...20 mA
≥ 250 O
HART
Modem
HART
Analog
Primary Master
Secondary Master
IFC110
Addr. 0
Terminal I
Terminal I
⊥