KROHNE ALTOFLUX IFS 4005 EN - Manual (Page 14)

14
PLEASE NOTE!
• The limits specified in the table for process temperature and operating pressure make allowance
for the tube liner and the flange standard. Refer also to footnotes 1) to 4).
• Refer to certificates of conformity for max. allowable operating data for
hazardous-duty versions, provided only with hazardous-duty equipment.
• Abbreviations used: DIN = DIN 2501 (= BS 4504)
ANSI = ANSI B 16.5
AWWA = AWWA
API = API 6 BX
11 Limits
Limits for Teflon ® -PFA, Teflon ® -PTFE and Tefzel
Liner Flange Max. operating pressure in bar (psig) at a process temperature of ....
Stan- Nominal diameter Pressure ( ≤ 1 40 °C ( ≤ 1 60 °C ( ≤ 1 70 °C ( ≤ 1 90 °C ( ≤ 100 °C ( ≤ 120 °C ( ≤ 140 °C ( ≤ 180 °C
dard rating/ ( ≤ 105 °F) ( ≤ 140 °F) ( ≤ 158 °F) ( ≤ 195 °F) ( ≤ 210 °F) ( ≤ 250 °F) ( ≤ 285 °F) ( ≤ 355 °F)
Class 1) 1) 2) 1) 2)
PFA DIN DN 25-50, DN 80 PN 40 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580)
DN 65, DN 100-150 PN 16 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230)
ANSI 1”-6” 150 lb 19.6 (284) 19.0 (275) 18.7 (271) 18.1 (262) 17.7 (256) 17.0 (246) 16.2 (235) 14.7 (213)
PTFE DIN DN 10-20 PN 40 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) on request
DN 200-600 PN 10 10 .0 (150) 10 .0 (150) 10 .0 (150) 10 .0 (150) 10 .0 (150) 10 .0 (150) 10 .0 (150) 10 .0 (150)
PN 16 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230)
ANSI 3/8”-3/4”, 8”-24” 150 lb 19.6 (284) 19.0 (275) 18.7 (271) 18.1 (262) 17.7 (256) 17.0 (246) 16.2 (235) 14.7 (213)
300 lb 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) on request
Tefzel DIN DN 200-600 PN 10 10 .0 (150) 10 .0 (150) 10 .0 (150) 10 .0 (150) 10 .0 (150) 10 .0 (150) – –
PN 16 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) 16 .0 (230) – –
ANSI 8”-24” 150 lb 19.6 (284) 19.0 (275) 18.7 (271) 18.1 (262) 17.7 (256) 17.0 (246) – –
300 lb 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) 40 .0 (580) – –
1) With insulation class E of the field coils, the maximum process temperature allowable is 120 °C (250 °F).
2) Max. process temperature 140 °C (285 °F) for the IFM 4010 K, IFM 4020 K and IFM 4080 K compact flowmeters.
Ambient temperature max. 40 °C (105 °F).
Limits for FEP, soft rubber, Irathane and Neoprene
Flange Max. operating pressure in bar (psig) at a process temperature of ....
Stan- Meter size/ Pressure/ Soft rubber Neoprene Irathane FEP
dard Nom. dia. rating/Class ≤ 40 °C ( ≤ 105 °F) ≤ 60 °C ( ≤ 140 °F) ≤ 70 °C ( ≤ 158 °F) ≤ 100 °C ( ≤ 210 °F)
DIN DN 200-1000 PN 10 10 (150) 10 (150) 10 (150)
PN 16-1500 16-64 (150-920) 3) 16-100 (150-1450) 3) 16-1500 (150-20000) 3)
≥ DN 1100 DN 2.5-6 2.5-6 (37-90) 3) 2.5-6 (37-90) 3) 2.5-6 (37-90) 3)
ANSI 8”-40” 150 lb ≤ 19.6 ( ≤ 284) 4) ≤ 19.0 ( ≤ 275) 4) ≤ 18.7 ( ≤ 271) 4)
300 lb ≤ 50.8 ( ≤ 737) 4) ≤ 49.2 ( ≤ 714) 4) ≤ 48.4 ( ≤ 702) 4) on request
600 lb ≤ 64.0 ( ≤ 920) ≤ 100.0 ( ≤ 1450) ≤ 100.0 ( ≤ 1450)
AWWA ≥ 14” B 6 (90) 6 (90) 6 (90)
D 10 (150) 10 (150) 10 (150)
API ≥ 8” 20 000 psig – – ≤ 1500 ( ≤ 20000)
3) dependent on flange pressure rating
4) dependent on process temperature
Vacuum load
Liner Meter size/Nom. dia. Min. operating pressure in mbar abs. (psia) at a process temperature of ....
DN inch ( ≤ 1 40 °C ( ≤ 1 60 °C ( ≤ 1 70 °C ( ≤ 1 90 °C ( ≤ 100 °C ( ≤ 120 °C ( ≤ 140 °C ( ≤ 180 °C
mm (
≤
105 °F) (
≤
140 °F) (
≤
158 °F) (
≤
195 °F) (
≤
210 °F) (
≤
250 °F) (
≤
285 °F) (
≤
355 °F)
PFA DN 25- 11 150 1 1”- 11 6” 000 0 00 (0) 000 0 00 (0) 000 0 000 (0) 000 0 000 (0) 000 0 000 (0) 000 0 000 (0) 000 0 000 (0) 000 0 000 (0)
PTFE DN 10- 111 20 3 / 8 ”- 1 3 / 4 ” 000 0 00 (0) 000 0 00 (0) 000 0 000 (0) 000 0 000 (0) 000 0 000 (0) 0 500 0 (7.3) 0 750 0 (9.7) 1000 (15.0)
DN 200- 1 300 1 8”- 1 12” 0 500 0 (7.3) 0 750 0 (9.7) 1000 (15.0) 1000 (15.0) 1000 (15.0) 1000 (15.0) 1000 (15.0) 1000 (15.0)
DN 350- 1 600 14”- 1 24” 0 800 (11.2) 1000 (15.0) 1000 (15.0) 1000 (15.0) 1000 (15.0) 1000 (15.0) 1000 (15.0) 1000 (15.0)
Tefzel DN 200- 1 600 1 8”- 1 12” 0 100 0 (1.5) 0 100 0 (1.5) 0 100 0 (1.5) 0 100 0 (1.5) 0 100 0 (1.5) 0 100 0 (1.5) – –
Soft rubber DN 200- 1 300 1 8”- 1 12” 0 500 0 (7.3) – – – – – – –
DN 350-1200 14”- 1 48” 0 600 0 (8.7) – – – – – – –
Irathane DN 200-1800 1 8”- 1 72” 0 500 0 (7.3) – – – – – – –
Neoprene DN 200- 1 300 1 8”- 1 12” 0 400 0 (5.6) 0 400 0 (5.6) – – – – – –
DN 350-3000 14”-120” 0 600 0 (8.7) 0 600 0 (8.7) – – – – – –
FEP DN 200-2000 1 8”- 1 80” on request
Teflon ® is a registered trademark of Du Pont.