KROHNE OPTIWAVE 7300C ATEX EN - Manual (Page 8)

2
INSTALLATION
8
OPTIWAVE 7300 C
www.krohne.com 06/2010 - 4000091504 - AD ATEX OPTIWAVE 7300 R06 en
2.1 Precautions
2.1.1 General notes
2.1.2 Electrostatic discharge
Take the necessary antistatic precautions if you:
• handle,
• install or
• use
the device in potentially explosive atmospheres. Do not install in a location (near to ventilation
systems, for example) where the electrostatic charge can increase.
WARNING!
When you install the device, obey the conditions in the EC-Type Examination certificate. These
conditions include:
• The special conditions for safe use.
• The Essential Health and Safety Requirements.
The certificate is given on the CD-ROM supplied with the device. You can also download the
certificate from our internet site.
DANGER!
This installation must agree with EN 60079-14: Explosive atmospheres - Part 14: Electrical
installations design, selection and erection and EN 61241-14: Electrical apparatus for use in the
presence of combustible dust - Part 14: Selection and installation.
DANGER!
Risk of electrostatic discharge from the blue plastic sun cover, the Drop antenna and the flange
plate protection (if the Drop antenna has this option). Make sure that all personnel and
equipment are correctly grounded.
Figure 2-1: ESD warning sticker (below the device nameplate)
1 Text: Plastic Parts
2 Text: Warning! Potential electrostatic hazard - see instructions
PLASTIC PARTS
WARNING:
POTENTIAL ELECTROSTATIC HAZARD
SEE INSTRUCTIONS
!