KROHNE OPTIWAVE 7300 WHG Overfill Protection EN - Manual (Page 10)

5
OPERATION
10
OPTIWAVE 7300 C
www.krohne.com 01/2013 - 4002495601 - AD WHG OPTIWAVE 7300 R02 en
5.3.2 DTM installation
DTM installation procedure
• Download PACTware version 4.1. The software is available on this webpage:
http://krohne.com/en/dlc/software/.
• Click on the Device Device Device Device button in the main toolbar.
• Extract the files from the ZIP folder “PACTware_4-1.zip”.
• Go to the folder “PACTware_4_1_0_26_Setup and double click on the “setup.exe” file.
• Install PACTware. Follow the procedure in the set-up wizard. If your computer does not have
Microsoft .NET Framework, the installation package will also install this software.
• Go to Field instrument software > 4_DTM_OPTIWAVE_ENG-DE Field instrument software > 4_DTM_OPTIWAVE_ENG-DE Field instrument software > 4_DTM_OPTIWAVE_ENG-DE Field instrument software > 4_DTM_OPTIWAVE_ENG-DE on the DVD-ROM supplied with
the device.
• Install the DTM file for the device (version 1.0.0.37A). Follow the procedure in the set-up
wizard.
i End of the procedure.
WARNING!
You must use DTM version 1.0.0.37A with the WHG-approved device. This software is supplied on
the DVD-ROM delivered with the device. It can also be downloaded from the
“ Download center:
Software ” web page on the manufacturer ’ s website.