General safety information, 5 iecex nameplates, Compact version – KROHNE OPTIFLEX 2200 IECEX User Manual

Page 6

GENERAL SAFETY INFORMATION

OPTIFLEX 2200 C/F

www.krohne.com

04/2013 - 4000861902 - AD IECEX OPTIFLEX2200 R02 en

1.5 IECEx nameplates

Compact version

Figure 1-1: Compact version, Ex ia nameplate

Figure 1-2: Compact version, Ex d ia / Ex ia tb nameplate

1 IECEx certification agency code
2 Types of device protection including approved Gas Groups and temperature classes (T6...T3 or T2 - depends on the

probe type) and equipment protection level

3 Types of device protection including approved Dust Groups, maximum surface temperature degree of ingress protec-

tion (if fitted with the appropriate cable glands) and equipment protection level

4 4...20 mA passive - HART output option:

4...20 mA passive - HART output option:

4...20 mA passive - HART output option: Intrinsically-safe circuit data
Fieldbus (FF or PROFIBUS PA) options:

Fieldbus (FF or PROFIBUS PA) options:

Fieldbus (FF or PROFIBUS PA) options: Entity or FISCO power supply parameters

5 4...20 mA passive - HART output option:

4...20 mA passive - HART output option:

4...20 mA passive - HART output option: Maximum voltage in accordance with IEC 60079-0. Refer to 7 for the input
voltage range.

6 4...20 mA passive - HART output option:

4...20 mA passive - HART output option:

4...20 mA passive - HART output option: Minimum waiting time after power-off before it is safe to open the terminal
compartment
Fieldbus (FF or PROFIBUS PA) options:

Fieldbus (FF or PROFIBUS PA) options:

Fieldbus (FF or PROFIBUS PA) options: Entity or FISCO power supply parameters

7 Input voltage range and maximum current (4...20 mA passive - HART) / basic current (FF or PROFIBUS PA)
8 Cable entry type and size (M20×1.5 or ½ NPT)