KROHNE OPTIBAR P 2010 C Ex EN - Manual (Page 3)

SAFETY INSTRUCTIONS
1
3
OPTIBAR P 1010/2010 C
www.krohne.com 01/2014 - 4002866801 - AD OPTIBAR PX010 Ex R01en
1.1 General notes
These additional instructions apply to explosion-protected versions of the pressure transmitter
OPTIBAR P 1010 C / P 2010 C with the marking II 1 G or II 1 D. They complete the standard
documentation for non-explosion protected versions.
The information given in these instructions contains only the data relevant to Category 1
explosion protection. The technical details given in the standard documentation for the non-
explosion protected versions apply unchanged unless excluded or superseded by these
instructions.
1.2 EC conformity
The manufacturer declares with the EC declaration of conformity on his own responsibility
conformity with the protection goals of directive 94/9/EG acc. to EN 60079-0 and EN 60079-11 for
use in hazardous areas with gas.
The EC type test certificate of the Institut für Sicherheitstechnik GmbH forms the basis of the EC
declaration of conformity:
The "X" after the certificate number refers to special conditions for safe use of the device, which
have been listed in these instructions.
The EC type test certificate may be downloaded from the manufacturer's website as needed.
1.3 Approval according to the IECEx scheme
Conformity with IECEx standards was tested in accordance with the IECEx Certification Scheme
for Explosive Atmospheres acc. to IEC 60079-0, IEC 60079-11 and IEC 60079-26. The number of
the IEC certificate is:
The "X" after the certificate number refers to special conditions for safe use of the device, which
have been listed in these instructions.
The EC type test certificate may be downloaded from the manufacturer's website as needed.
IBExU 13 ATEX 1133 X IBExU 13 ATEX 1133 X IBExU 13 ATEX 1133 X IBExU 13 ATEX 1133 X
IECEx IBE 13.0050 X IECEx IBE 13.0050 X IECEx IBE 13.0050 X IECEx IBE 13.0050 X