KROHNE PTD 500 EN User Manual

Page 5

Installation and Operating Instructions PTD 500

1.3.1 Connection

diagrams

PTD 500

1.3.2 Start-up

• Check for leak-tightness at the sleeve.

• Make sure that the cable glands are tight and, as the case may be, the M12 connectors are

properly tightened down.

• Check that the device is functioning properly (current output).

• Make sure that the housing lid is screwed down tight.

1.3.3 Operator

control

• The device itself has no an auto zero function by pressing the button located behind the

electrical plug

1: braun / brown
2: weiß / white