KROHNE PTD 500 EN - Manual (Page 3)

Installation and Operating Instructions PTD 500 3
Safety information
Please read this manual carefully, and also take note of country-specific installation standards
(e.g. the VDE regulations in Germany) as well as prevailing safety regulations and accidents
prevention rules. For safety and warranty reasons, any internal work on the instruments, apart
from that involved in normal installation and electrical connection, must be carried out only by
qualified KROHNE personnel.
Items includes with supply
• Measuring instrument
• Hygienic adapter
• Installation and operating instructions
Produkthaftung und Garantie
Responsibility for suitability and intended use of these instruments rests solely with the operator.
Improper installation and operation of the instruments may lead to loss warranty.
In addition, the “General conditions of sale” forming the basis of the purchase contract are
applicable.
If instruments need to be returned to KROHNE, please note the information given on the last-but-
one page of these instructions.
KROHNE regrets that it cannot repair or check your instruments unless accompanied by a fully
completed Service and Repair sheet.
CE / EMC / Standards/ Approvals
The product bears the CE marking on account of compliance with and application of the following
standards:
EMCG (89/336/EEC)
EN 50081-1, 50081-2
EN 61326
EN 50121-4