页面 44, Assemble the speaker, Safety precautions – Audiovox FPE3707HR User Manual

Page 44

1.Thoroughly read this instruction before setup and follow the steps below precisely.
2.Very carefully handle the unit during setup and consult authorized service personnel to ensure

successful installation.

3.The table or other platform to be placed with the Display should be put a soft cushion on and be

able to support the weight as well as be stable.

4.Make sure not to handle the Speaker when moving the Display.

Safety precautions:

Screw the Speaker and the Fixed board to the unit using the supplied screws and tighten
securely, then install the two Connecting covers as shown in Fig.1.

Connecting cover

Screws

Fixed board

Screws

Connecting cover

Fig.1

Assembling the Speaker

Note:

1. Unplug the TV and all connected components before assembling and connecting the Speaker.

2.Connect the speaker audio cable between the speaker output jacks on the unit and Speaker

matching the “+” and “-” ends of the cable with color.

3. The appearance of the unit may differ from the actual one.

Assemble the Speaker