Audiovox FPE3707HR - Manual (Page 14)

Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.
Refer to the user manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
12
Connect a VCR
AV OUT
L R VIDEO AUDIO
- S VIDEO ANT IN
ANT OUT
AV IN
Rear of the VCR
S-video
cable
o
r Audio
cable
VCR
Video
cable
L R VIDEO AUDIO
Connect an Audio Processor or Hi-Fi (Digital Audio)
For a full Home Theater sound experience, you must connect your Hi-Fi or
Audio processor to the S/PDIF OUT(Optical) terminal on the TV rear.
Note:
The S/PDIF OUT terminal only can output digital TV program’s audio.
Audio Processor HIFi System
OR
S/PDIF IN
(Optical)
Optical cable
Connect the Audio/Video cables between the Audio (L/R)/Video
jacks on the unit and VCR.
Note: For better video, you can use the S-VIDEO terminal if
your source supports it. S-VIDEO input uses the same circuit
as Video1. S-VIDEO has priority if both connectors are
inserted. Use one or the other.
How to connect:
1. Turn on your TV, press INPUT button on the remote control to
display INPUT SELECT menu, use5/6to select AV1/SVideo
and then press OK to confirm.
2. Turn on your VCR , insert a videotape and press the Play button.
To play VCR
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
S -V
ID E O
fo
r s
o ft w a re
u p d a te
o n ly
R S -2
3 2
L R
S
-V
ID
E O
L R