Operating instructions, Aoc lm-500, Adjusting the osd settings – AOC LM-500 User Manual

Page 10

Text mode
Original mode

AOC LM-500

v3_123102

AOC LM-500

Operating Instructions

Adjusting the OSD Settings

1. Press the Shuttle Knob button to open the

OSD window.

2. Rotate the Shuttle Knob until the desired

function is highlighted.

3. Press the Shuttle Knob again to open the

function window.

4. Rotate the Shuttle Knob to change the settings

of the function.

5. To save and exit, highlight the EXIT icon and

press Shuttle Knob or leave the monitor
alone for 10 seconds. If you want to adjust any
other function, repeat steps 2-4.

Note: When the OSD window is open, the input
signal timing settings appear at the top.
H: stands for horizontal frequency and
V: stands for vertical frequency.