Asus K8V-F - Manual (Page 31)

ASUS K8V-F motherboard user guide 1-21
8. Front panel audio connector (10-1 pin FP_AUDIO)
This is an interface for the Intel front panel audio cable that allow convenient
connection and control of audio devices.
7. ATX power connectors (20-pin ATX_POWER1, 4-pin ATX12V)
These connectors connect to an ATX 12V power supply. The plugs from the power
supply are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
In addition to the 20-pin ATXPWR1 connector, this motherboard requires that you
connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU.
• Do not forget to connect the 4-pin ATX +12V power plug. Otherwise, the
system does not boot up.
• Make sure that your ATX 12V power supply can provide 12A on the +12V
lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum
recommended wattage is 300W, or 350W for a fully configured system. The
system may become unstable or may not boot up if the power is inadequate.
®
K8V-F ATX Power Connectors
ATXPWR ATX12V
Pin 1
+3.3VDC
-12.0VDC
COM
PS_ON#
COM
COM
COM
-5.0VDC
+5.0VDC
+5.0VDC
K8V-F
®
K8V-F Front Panel Audio Connector
FP_AUDIO
BLINE_OUT_L
MIC2
Line out_R
Line out_L
BLINE_OUT_R
NC
MICPWR +5VA
AGND