AltiGen comm Adv Call Router 6/2008 4510-0001-6.0 - Manual (Page 12)

Advanced Call Router Route Rules
8 Advanced Call Router Manual
Note: Play WG Queue Status - if you select “Play WG Queue
Status,” Advanced Call Router must log on as a workgroup
extension with password (View > Show Workgroup Status >
Add) and Call Router’s virtual extension and password. (The
virtual extension that Call Router uses does not have to be a
member of the workgroup.) Specify this workgroup extension
in the textbox that appears when you select Play WG Queue
Status. (See “Queue Announcements” on page 13.)
If you want to apply the “Play WG Queue Status” Target
action to several different workgroups, you must create separate
rules for each.
6. Enter optional data to match against the routing rule:
• Set Call Priority—Check the box and choose a call priority level.
• Set Call SKLR—Check the box and choose an SKLR level.
• User Data—Gathered from a response to an Auto Attendant
prompt or another AltiLink Plus application.
• Push URL (AltiWeb only).
• Prompt—The prompt to play to the callee.
7. Click OK.
Viewing Advanced Call Router History Menu
The Advanced Call Router window gives a history of all incoming trunk
calls to Advanced Call Router.
To specify Call Router History window content
1. Choose View > Select Column.
2. In the Select Columns dialog box, select the following columns to
display in the Call Router history window:
• Caller ID
• IVR Path
• IVR data
• DNIS