HT instruments HT327 - Manual (Page 6)

HT327
EN - 5
3. PREPARATION FOR USE
3.1. INITIAL
This instrument was checked both mechanically and electrically prior to shipment. All
possible cares and precautions were taken to let you receive the instrument in perfect
conditions.
Notwithstanding we suggest you to check it rapidly (eventual damages may have occurred
during transport. If so contact the local distributor from whom you bought the item).
Make sure that all standard accessories mentioned in § 6.3.1 are included.
Should you have to return back the instrument for any reason please follow the
instructions mentioned in § 7.
3.2. SUPPLY
VOLTAGE
The instrument is supplied by 1x9V battery type NEDA1604 JIS006P IEC6F22. When
battery is low, a low battery indication “
” is displayed. To replace/insert battery please
refer to § 5.1.
3.3. CALIBRATION
The instrument complies with the technical specifications contained in this manual and
such compliance is guaranteed for 1 year. Annual recalibration is recommended.
3.4. STORAGE
After a period of storage under extreme environmental conditions exceeding the limits
mentioned in § 6.2.1 let the instrument resume normal measuring conditions before using
it.