Catskill Craftsmen 61532 - Manual (Page 10)

STEP 11
A. Insert and tap caster sockets with hammer until
the teeth grab the wood. DON’T POUND SOCKET
FLAT OR CASTER SHAFT WILL NOT ENTER.
B. Insert casters and seat by pushing straight
downward with heel or your hand, or tap into place
with a hammer. Don’t be afraid to give them a good
downward whack on the solid metal part of the
caster!
C. Locking wheels usually go on back, but can go
diagonally or on the front if cart is moved a lot.
STEP 12
Decide which side you want the towel bar on. Place a washer on the
1” #8 screws and attach handle/towel bar to either side panel from
inside the side panel.
2 used in this step
1” Phillips Flat Head #8 Screw
STEP 13
Attach Spice Rack to Side Panel
Attach the spice rack to the other side using 1” #8 screws
into pilot holes in top shelf. Place washer over screws first.
Phillips Flat Head
1” #8 Screw
2 used in this step
PHILLIPS FLAT HEAD 1” #8 SCREW
2 used
in this step
3/16” Flat Washer
3/16” Flat Washer
2 used in
this step