Catskill Craftsmen 51575 - Manual (Page 9)

STEP 9
A. Stick magnet to magnet plate on right door.
B. With left door open, close the right door. The magnet should be positioned over the wooden block
on the bottom of the top front brace. Hold the magnet in place with your thumb, and open the right
door. The magnet will be in the correct position on the block. Mark your holes with a pencil.
C. Secure magnet with the two pan head screws in the magnet packet. Center screws in the slots in
the magnet . This will allow adjustment later, if needed.
NOTE: No pilot holes in block, as softwood!
D. Tap in the 12 wood disks into the side panels after making sure drawer and doors open/close
easily. Tighten all bolts.
Magnet
5/8” Pan Head Screw
2 Used
in this step
5/8” Wooden disk