Catskill Craftsmen 2005 User Manual

Page 10

STEP 8

DRAWER ASSEMBLY

Attach Drawer Back to Drawer Sides using 1-1/4” Phillips Flat Head #8

screws. Then insert Drawer Bottom into slots (Best side up). Put bastion posts into

Drawer Front & secure to Drawer Sides using barrel nuts & set screws. Attach the

Glide inserts to the drawer sides so that the front of the glide insert touches the

drawer front, using 7/16” Phillips Pan Head #6 Screws.

Illustration 8

STEP 9

FINAL STEP

After you have the drawer assembled simply upright the unit and attach the

drawer to the cart by sliding it into the Glide Rails. Drawer glides will lock into place.