Catskill Craftsmen 2007 User Manual

Page 10

STEP 8

ASSEMBLE DRAWER

A. Attach the drawer back to the drawer sides with 1 1/4” #8 screws. Slide in drawer bottom, best side

up. Attach front using the Bastion System. Holes in the posts will be parallel to the long edge of the

drawer front. See illustration.
B. Attach the drawer glide to the drawer sides with 1/2” #6 screws in the places indicated in the

illustration. Black plastic lever will face outward. Glide will be up against the back of the drawer front.

Holes along the

bottom edge of the

drawer sides are not

used in this model.

STEP 9

FINAL STEPS

A. Upright unit. Slide drawer into bas. Glides will automatically lock into place.