Step 11, Step 12 – Catskill Craftsmen 1538 User Manual

Page 10

STEP 11

A. Upright unit.

B. Determine if you want the Knife Rack on the left or right Side Panel. The Handle/Towel Bar will go

on the other. Then attach the Knife Rack to the Side Panel with two 1 1/4” x #8 screws from inside the

panel. Place a washer over the screw so that so that the head won’t pull through the side panel.

C. Attach Towel Bar to the other Side Panel with 1 1/4” #8 screws from inside the Side Panel. Place a

washer over each screw.

ILLUSTRATION 11

STEP 12

A. Angle the Bottom Shelf as necessary to pass it

through the opening in the cabinet top until it

rests on the pins installed in step 8.

ILLUSTRATION 12