Catskill Craftsmen 1536 - Manual (Page 9)

STEP 9
Attach handle/towel bar to side panel with 1 1/4” #8 screws from inside side
panel.
1 1/4” Phillips Flat Head #8 Screw (12)
2 Used in this step
STEP 10
A. Tap/insert ONE 1 1/2” pin into
each end of both doors. DON”T
OVERDRIVE PINS! pins should
stick up about 1/2” when seated.
B. Attach the doorspace to the
left door with 5/8” #8 screws.
The spacer has a space at the
top to allow magnet clearance
and is almost flush with the
bottom of the door.
C. Attach the magnet plate (
may be stuck to magnet! ) with
the small flat head screw to the
top of the right door.
D. Attach door handles with 1”
truss head machine screws.
1 1/2” Long 3/16” DIA. Steel Pin (4)
4 used in
this step
5/8” Phillips Flat Head #8 Screw (23)
3 used in this step
ILLUSTRATION 9
Magnet Plate (1)
1” Truss Head Machine Screw (6)
2 used
in this step
1/2” Phillips Flat Head #4 Screw (1)
2 used in this step
ILLUSTRATION 10