Step 7 – Catskill Craftsmen 1429 User Manual
Page 12
STEP 7
1 Main Assembly, 1 Assembled Upper Drawer, 1 Assembled Lower Drawer, 1 Assembled Top,
1 Middle Shelf
1. Now tap in 1” pins into the middle braces with a hammer and fit the middle shelf on the top of the
pins.
2. Fit the Top into place then secure it to legs using 5/8” #6 screws through the “L” Brackets. (Note:
top drawer must be removed to allow for attaching “L” brackets)
3. Attach the drawers to the cart by sliding them into the Glide Rails.
Finishing Touches
ILLUSTRATION 7
Note: It may be necessary to remove the cutting board rails & slats
to fully tighten the L-Bracket screws
See also other documents in the category Catskill Craftsmen Furniture:
- 1426 (13 pages)
- 1447 (5 pages)
- 1481 (16 pages)
- 1533 (12 pages)
- 1521 (16 pages)
- 1448 (14 pages)
- 1536 (12 pages)
- 1537 (13 pages)
- 1538 (14 pages)
- 1544 (14 pages)
- 1563 (12 pages)
- 1569 (12 pages)
- 1575 (13 pages)
- 1576 (14 pages)
- 1580 (14 pages)
- 1582 (17 pages)
- 1622 (7 pages)
- 1842 (18 pages)
- 1925 (6 pages)
- 2005 (11 pages)
- 2007 (11 pages)
- 2008 (11 pages)
- 1531 (13 pages)
- 1529 (14 pages)
- 1527 (12 pages)
- 1526 (13 pages)
- 1480DOR (17 pages)
- 1476 (13 pages)
- 1470 (12 pages)
- 1461 (8 pages)
- 1428 (15 pages)
- 3314 (6 pages)
- 3310 (6 pages)
- 7237 (12 pages)
- 14485 (14 pages)
- 15445 (14 pages)
- 43017 (13 pages)
- 51524 (12 pages)
- 51526 (13 pages)
- 51527 (11 pages)
- 51531 (12 pages)
- 51533 (11 pages)
- 51536 (11 pages)
- 51537 (12 pages)