Connections, 2 install dvd writer – Aposonic A-S3216T3 User Manual
Page 4
24/32-CH DVR Quick Start Guide
2
1.2 Install DVD Writer
Step 1: Unscrew and open the case and then unscrew the screws in the both
sides to take out of the upper iron bar as shown below:
Step 2: Install the DVD holder attached with the device. Please let the screw
holes of the DVD aim at the holder‟s. Try to place the holder farther away from
the front and then screw firmly. Then, unscrew and take the barrier out of the
front panel. Next, put the DVD with the holder into the case and let the screw
holes of the case aim at the holder‟s. Next, screw them firmly.
Step 3: Connect the power and data cables and install the upper iron bar.
Then, screw firmly with screws in the both sides.
Note: If the user installs a DVD, he can only install 4 HDD disks due to too
much room taken up.
2. Connections
Fig 2-1 Rear Panel for 24-ch