Work Sharp WSKTS-W Original KNIFE & TOOL SHARPENER - Manual (Page 5)

User’s Guide 5
• WARNING: Use of this tool can generate and/or disperse dust, which may
cause serious and permanent respiratory or other injury. Always use NIOSH/
OSHA approved respiratory protection appropriate for the dust exposure.
Direct particles away from face and body.
• CAUTION: Wear appropriate hearing protection during use. Under some
conditions and duration of use, noise from this product may contribute
to hearing loss.
SAFETY GUIDELINES — DEFINITIONS
It is important for you to read and understand this manual. The information it
contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS.
The symbols below are used to help you recognize this information.
• DANGER: Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
• WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
• CAUTION: Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol ( •) indicates a potentially
hazardous situation which, if not avoided, may result in property damage.
The label on your tool may include the following symbols.
V .................. volts A .............amperes
Hz ................ hertz W ............watts
min .............. minutes ...........alternating current
............. direct current
no ............no load speed
................ Class II Construction ...........earthing terminal
• ................ safety alert symbol rpm .........revolutions or
reciprocations per minute
Motor
Be sure your power supply agrees with nameplate marking. 120 Volts AC
only means your tool will operate on standard 60 Hz household power. Do
not operate AC tools on DC. A rating of 120 volts AC/DC means that your
tool will operate on standard 60 Hz AC or DC power. This information is
printed on the nameplate. Lower voltage will cause loss of power and can
result in over-heating.