Step 2, Step 3, Step 4 – Work Sharp WSKTS-W Original KNIFE & TOOL SHARPENER User Manual
Page 19: Sharpening scissors, Step 1
User’s Guide
19
Magnet
Scissors
Guide
Step 2
Pull scissors
steadily
through guide
along full length of blade.
NOTE
proper scissors-sharpening
position. Place scissor blade in
guide slot all the way to the hinge.
Guide magnet will help keep
the blade flat and stable during
sharpening.
Step 3
Repeat Step 2 about 5 times or until black
marker is sharpened off at the cutting edge.
Step 4
Repeat Steps 1 to 3 on other scissors
blade. Test scissors, repeat as needed.
10
Sharpening
Scissors
NOTE:
Sharpen only the beveled side of your scissors;
marking the beveled side with a black marker will make it
easier to see when the cutting edge has been sharpened.
Step 1
Belt:
P220 RED
Install the
red P220 belt
and
the outdoor knife guide
(includes scissor guide).
Hold scissors as
shown to keep
blades open during
sharpening.