WEN 2301 9.6 Volt Cordless Rotary Tool Kit - Manual (Page 11)

11
Specific Instructions For The Cordless Rotary Tool &
Charging Procedure
• The real secret of the Cordless Rotary Tool is its speed . To understand the ad-
vantages of its high speed, you have to know that the standard portable electric
drill runs at speeds up to 2,800 revolutions per minute . The typical electric drill
is a low-speed, high torque tool; the Cordless Rotary Tool is just the opposite—
a high-speed, low torque tool . The chief difference to the user is that in the
high-speed tools, the speed combined with the accessory mounted in the collet
does the work . You don’t apply pressure to the tool, but simply hold and guide it .
In the low speed tools, you not only guide the tool, but also apply pressure to it,
as you do, for example, when drilling a hole .
• It is this high speed, along with its compact size and wide variety of special ac-
cessories and attachments that makes your Cordless Rotary Tool different from
other power tools . The speed enables it to do jobs low speed tools cannot do,
such as cutting hardened steel, engraving glass, etc .
• Getting the most out of your Cordless Rotary Tool is a matter of learning how to
let this speed work for you .
Charging Procedure
The charger is ready to use without adjustment and is easy to operate .
• Plug the charger into an appropriate 120Volt outlet .
• Carefully insert the battery pack into the charging base . Make sure the battery
pack is fully seated in the charger . The green indicator light will come on indicat-
ing the charging process has started .
• Normal charging takes about 3 hours .
• Unplug the charger, remove the battery pack and insert into the rotary tool .
Figure
1 . Charger
2 . Adapter
3 . Battery Packet
➌
➊
➋