WEN 3410 Air Filtration System - Manual (Page 9)

Operation
The air filter can be operated directly using the control panel or with the remote control.
Turn on the air filter and speed setting (Fig. 3 and 4)
1. Plug the power cord into an appropriate power source.
2. Press the ON/Speed button (1) on the control panel or the remote control to power on the air
filter. The air filter will be running at low speed. The LO LED will light, indicating that the
unit has been worked at low speed.
3. Press the ON/Speed button (1) again to change the speed. The LEDs (2) next to the
ON/speed button on the control panel indicate the selected speed-high, medium, or low.
Set the timer (Fig. 3 and 4)
A timer allows you to operate the filter set the length of time (1, 2, 4 hours and clear the timer) that
the air filter will operate before shutting off automatically. The air filter can be set the timer with
the remote control only.
1. Press the TIME button (5) on the remote control to start the timer. The cycle is 1 hour, 2
hours, 4 hours and clear the timer.
2. Press the TIME button (5) on the remote control to set the timer. The LEDs (4) on the
control panel indicate the amount of time selected.
Note: the unit will shut off automatically after the selected time interval elapses. When you choose
clear the timer, the air filter will keep running until turning it off.
Turn off the air filter
To turn off the air filter, press the OFF button on the control or on the remote control.
Air Filtration System Model: 3410 WENPRODUCTS.COM 9