USGlobalsat BC-337 - Manual (Page 5)

BC-337 User Manual version 1.2
page 5 of 15
4. Installation
The BC-337 GPS receiver supports plug and play.
For PDA For Notebook PC
1. Plug BC-337 GPS receiver into the
Compact Flash slot of your PDA.
1. Plug BC-337 GPS receiver into PCMCIA card slot on
notebook PC through a general “Compact Flash to
PCMCIA adapter”.
2. Run the suitable mapping/navigation
software, select the correct COM port and
set the baud rate to 4800,N,8,1.
2. Install the “Compact Flash to PCMCIA” driver for
Windows 98, ME, 2000 or XP. (Please see section 3.2
for details.)
Usually the default COM port is COM2, but it
depends on your PDA type. You can use the
testing program (can be found within the CD)
to detect the COM port that the BC-337 is
currently using. 3. Run the suitable mapping/navigation software, select
the correct COM port and set baud rate to 4800,N,8,1.