Pc6152, General information, 4 safety and notification – Acnodes PC6152 User Manual
Page 9
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product descripti
are subject to change without no
please visit Acnodes’ web site at
PC6152
15” Core 2 Duo t
GENERAL INFORMATION
-Power Supply: AC 100V ~240V, 50~60Hz input, ATX 180W output (Built-i
- Drive Bays (Optional): 1x Slim HDD, 1x Compact Flash Type-II Slot (IDE,
CDROM (SATA interface, optional)
- Construction: Electo Galvanized steel chassis. Stainless steel front bezel
- Dimensions: 403 x 303 x 84mm (15.87"x11.93"x3.31")
- Net Weight: 7.3KG(16.09lb)
1-4 Safety and Notification
Following messages are safety reminders on how to protect your systems
helps you lengthen the life cycle of the system.
1. Check the Line Voltage
a. The operating voltage for the power supply should cover the range of A
system may be damaged.
2. Environmental Conditions
a. Place your PC6152 on a sturdy, level surface. Be sure to allow enough r
easy access.
b. Avoid extremely hot or cold places to install your PPC.
c. Avoid exposure to sunlight for a long period of time (for example in a cl
Also avoid the system from any heating device.). Or do not use PC615
doors in a cold winter day.
d. Bear in mind that the operating ambient temperature is from 0 C up to
e. Avoid moving the system rapidly from a hot place to a cold place or vice
tion may come from inside of the system.
f. Place PC6152 against strong vibrations, which may cause hard disk fail
g. Do not place the system too close to any radio active device. Radioacti
ference.
3. Handling
a. Avoid putting heavy objects on top of the system.
b. Do not turn the system upside down. This may cause the floppy drive an
c. Do not remove the diskette from the Floppy drive while the light is still o
If you remove the diskette while the light is on, you may damage the inform
4. Good Care
a. When the outside of the case is stained, remove the stain with neutral
cloth.