Acnodes PC6152 - Manual (Page 59)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC6152
15” Core 2 Duo touch Panel PC
Phoenix - Award CMOS Setup Utility OnChip IDE Device
Descriptions on each item above are as follows:
1. IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your
IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of
the optimal number of block read/writes per sector the drive can support
2. IDE DMA Transfer Access
To Enable/Disable the IDE DMA transfer access
3. OnChip Primary PCI IDE
The integrated peripheral controller contains an IDE interface with support for two IDE channels. Se-
lect Enabled to activate each channel separately.
4. Primary Master/Slave PIO, Secondary Master/Slave PIO
The four IDE PIO fields allow you to set a PIO mode (0-4) for each of the four IDE devices that the
onboard IDE interface supports. Modes