Tennsco SC2436 - Manual (Page 3)

6. After checking the entire
cart assembly for
squareness, tighten all
bolts and nuts.
4. Attach the right handle
bracket (Ref. No.7) to
outside of post using two
nuts and bolts.
5. Slide tubular handle
(Ref. No. 8) over the
embossed section of
the bracket. While still
holding the handle,
place the second
handle bracket into
position and bolt to the
post as you did in
step 4.
7. Your service cart is now assembled and ready for use.
NOTE: Pulling the cart can cause serious injury; when moving the cart, always
push the cart in front of you using the provided handle.