Replacement parts, Shelf adjustment, View from beneath shelf leveling the cabinet – Tennsco BCD18-72 User Manual
Page 2: For storage cabinet for locking handle
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Model Number (BCD18-72)
Purchase Date
Description of part(s) needed and part
Your company name
number(s) as shown in Parts List (above)
Contact person's name
Color (i.e. Medium Grey, etc.)
Who the product was purchased from
Was item missing, or was it damaged?
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888
Customer Service: (866) 446-8686
Fax: (866) 445-7260
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.
Shelf
301
Door (left)
978LD
Door (right)
978RD
Hinge Pin
944HP
PART DESCRIPTION
REPLACEMENT PARTS
PART NO.
For Storage Cabinet
For Locking Handle
PART DESCRIPTION
PART NO.
Lock Bar Set
978LB
Locking Handle w/keys and hardware
944LH
Locking Cam*
944LC
Cam Retainer*
944CR
Lock Bar Guide Insert*
944GI
*Included in Locking Handle w/keys and hardware (part no. 043LH). May be ordered alone or as part of the full hardware set.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However, should
your unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper replacement
parts follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.
Shelf Adjustment
1. Using a flat-head screwdriver, gently pull the
locking tab away from the hole in the shelf
edge. This will allow the shelf to be released
and lifted from the tab.
2. Place the shelf at the desired level.
3. Insert the shelf edges into the tabs at the new
location. Be sure that the shelf is securely
fitted into the tabs at all points of contact.
View from beneath
shelf
Leveling the Cabinet
If cabinet doors don't easily open and close, your
unit likely needs leveling. Leveling can be accom-
plished by placing small shims underneath the
corners of the unit until the doors align along the top.