Tighten the cover with twist tite, Keeping door panels open, Attach enclosure end and zipper door panels – ShelterLogic 27775-27777 30 x x0 2-3/8 ULTRAMAX Enclosure Kit" User Manual
Page 5

05-27275_27276_27277_27775_27776_27777-0A
Page 5
3. TIGhTEN ThE COvER WITh TWIST TITE
™
4. KEEPING DOOR PANELS OPEN
A. Wrap the cord with plastic ball and "S" hook at the corners of the cover around the
corner leg poles. Insert "S" hook into the hole of the corner leg poles.
B. Twist each leg pole toward the inside of the shelter until the cover becomes tight
Twist the leg poles equally to ensure the cover stays aligned during tightening.
The front door panel has grommets positioned to hold the doors open in either
of the below configurations with the use of bungee cords.
Twist-Tite
™
Tighten Cover
2. ATTACh ENCLOSURE END AND ZIPPER DOOR PANELS
When securing enclosure panels to corner legs, note that each bungee is shared with the neighboring panel.
NOTE:
Door panels zippers must be closed when securing door panel.
Interior / Rear View of Canopy Enclosure Panels
Back Panel
One bungee for
both panels.
Side Wall
Panel