ShelterLogic 25793 10 x 10 Celebration Canopy - Manual (Page 4)

3. Securing Cover
Page 4
Fig. 3
Fig. 4
Fig. 5
Unpackaged the cover and place the bright blue side facing up over the assemble canopy frame.
Once the cover is placed over the frame to secure the cover pick up the corner of the cover to expose the elastic
and metal hold down clips. Secure the metal clips to the into the upright tubes holes see figure 4.
Once the cover has been attached in all four corners attach the bungee to the tube see figure 5.
4. Base Feet 5. Anchors
Fig. 6
Fig. 7
Locate a suitable location to place two anchors
as shown in the illustration into each of the base
feet until the round end of the anchor couches the
base feet.
Insert Base Feet Plates onto bottom of legs,
be sure to line up the pre-drilled hole in the
leg with the pre-drilled hole in the base foot.
Insert PIN all the way through leg and foot,
to other side, secure with ring.