ShelterLogic 25793 10 x 10 Celebration Canopy - Manual (Page 3)

Assembly upright tube 10391 to upright tube10392. Do
this for all four legs.
Lift one end of the assemble top and depress the ass-
embly button and insert the tube into the three way
corner connector 10385, confirm the assembly button
clicks into the three way connector 10385.
After installing two of the upright tubes, lift the other
side of the assemble top and install the last two upright
tubes. Your canopy will be sitting on all four uprights.
Page 3
1. Frame Assembly
2. Attaching Legs
10386 10390
10387
10585
10385
10386
10387
Fig. 1
Fig. 2B
Fig. 2A
10391
10392
Assembly rafter tube 10386 to rafter tube 10387, the
connector pins should be facing out, there should be
four assembled tubes when complete.
Depress the assembly buttons at the end of each tube
and assemble the four assembled tubes into top con-
nector 10585, be sure the buttons click into the holes
in the connector.
Assemble rafter tube 10386 to rafter tube 10390 and
rafter tube10387 the assembly buttons should be fac-
ing out.
Depress the assembly button at the end of the tubing
and assemble corner connector 10385 into the asse-
mbled tubing 10386 and 10387. Do this on all four
corners.
The part number is stamped on each part.