ShelterLogic 23531 10 x 20 Max AP Canopy 2-in-1 Pack - Screen Kit - Manual (Page 5)

05-23531-0D Page 5
3. ASSEMBlE lEGS & ATTACH TO ROOF FRAME
A. Attach all legs to one side first. Let the other side of roof frame rest on the
ground. Repeat for opposite side.
Leg Pole Assembly
13105
13103
10075
4. ANCHOR THE FRAME
Insert the (4) Anchor pins into the ground and tie ropes from the anchors to the corner tees as shown below.
These are temporary spike anchors. Not intended for permanent use.
Tie Rope Around Frame Corners
13105 rope
13101