ShelterLogic 25757 10 x 20 Max AP Canopy - Manual (Page 4)

05-25757-0F Page 4
2. AsseMBle rOOF FrAMe
Swedged Tubes Connections
13104 13103
NOTE: Swedged tubes insert into plain ends at the crimp marks.
3. AsseMBle leGs & AttACH tO rOOF FrAMe
Attach all legs to one side first. Let the other side of roof frame rest on the
ground. Repeat for opposite side.
4. ANCHOr tHe FrAMe
Insert the (4) Anchor pins into the ground and tie rope from the anchors to the corner tees as shown below.
These are temporary spike anchors. Not intended for permanent use.
To securely anchor canopy, Accessory Anchoring Kit #10073 is recommended.
Tie Rope Around Frame Corners
13105
rope
13101
Leg Pole Assembly
13105
13103
10075
Spike Anchor