Caution – ShelterLogic 22599 10’x15’ Straight Leg Pop-Up User Manual
Page 3
05-22550-22551-22552-
22553-22554-22555-22599-0C
Page 3
Step 1:
Remove assembly
from portable, wheeled
storage bag. Grab corner
legs in each hand. Lift
frame slightly off ground.
Stepping backwards, pull
frame apart until your
arms are fully extended.
Step 2:
Unfold cover. Place
cover over frame. Align
corner pockets of cover
over frame legs.
Step 3:
Step 4:
At the four corners slide the corner slide up
until the button “pops” into place as shown.
When this is done pull the cover corners
down snugly and smoothly. Lift the valance
over the middle legs and insert the tension
hook in the anchor hole. Wrap theT over the
cross bar and pull the elastic loop under the
cross bar. Insert the T thru the elastic loop
to secure the valence.
Do not place hands between frame tubes.
Push up until canopy is fully opened.
Step 5:
Step 6:
For temporary anchoring of canopy on
grass, dirt or packed soil, insert temporary
spike anchors through corner feet.
CAUTION:
Temporary spike anchors are NOT designed
for permanent installation. Never leave canopy unattended.
For all PRO SERIES
™
straight leg Pop-Ups, legs should be
square and straight when temporary spike anchors are
inserted through corner feet.
For assembly questions, Please call Customer Support:
1-800-524-9970 or in CANADA: 1-800-559-6175
Corner of
shelter
anChor
Slide legs to desired height, making
sure buttons snap into place.