Assemble legs & attach to roof frame, Assemble cover rails, Use bolts as shown in illustrations – ShelterLogic 62659 12 x 20 x 8 Port-in-a-Box User Manual
Page 5: A. place the cover rail
05-62659-0A
Page 5
Use Bolt
10115
12270
802693
Middle Legs
3. ASSeMBle leGS & AttAcH to rooF FrAMe
Use bolts as shown in illustrations.
4. ASSeMBle coVer rAIlS
A. Assemble Corner and Middle legs.
B. Attach legs with bolts on one side of roof frame, let the other side of roof frame rest on the ground.
C. Attach remaining legs with bolts to opposite side of roof frame.
802694
Use Bolt
03032
Use Bolt
03032
Use Bolt
10115
802637
Corner Legs
802695
Corner Legs
Middle Legs
Middle Rib Cross Rail Clamps
10115
802695
802695
13201
802693
01010
01011
A. Place the cover rail
(802695)
at each leg and secure it at each leg with a cover clamp as shown below.
B. Slide the cover rails so they are 8" up from the ground and hand tighten bolts on clamps.
Side Bend Connector and ShelterLock
01010
01010
01010
800597
03032
10210
802130
03032
802692
802694
802695
802695
802695
802695
End Rib Cross Rail Clamps
10115
802695
13202
802637
01011
01010
10150