Assemble legs & attach to roof frame, Assemble cover rails, Use bolts as shown in illustrations – ShelterLogic 62681 10 x 15 x 8 AutoShelter 1015 User Manual
Page 5

05-62681-0A
Page 5
3. ASSeMBle leGS & ATTAcH To rooF FrAMe
Use bolts as shown in illustrations.
4. ASSeMBle coVer rAIlS
A. Assemble Corner and Middle legs.
B. Attach legs with bolts on one side of roof frame, let the other side of roof frame rest on the ground.
C. Attach remaining legs with bolts to opposite side of roof frame.
A. Place the cover rail
(800163, 13345)
at each leg and secure it at each leg with a cover clamp as shown below.
B. Slide the cover rails so they are 8" up from the ground and hand tighten bolts on clamps.
Corner Legs
Middle Legs
802633
802634
Use Bolt
10115
Use Bolt
03032
Use Bolt
10115
802637
Corner Legs
Use Bolt
10115
Use Bolt
03032
Use Bolt
10115
12270
802633
802635
Middle Legs
FronT
reAr
Middle Rib Cross Rail Clamps
10115
800163
13345
13201
802635
01010
01011
End Rib Cross Rail Clamps
10115
800163
13202
802637
01011
01010
Attach Legs to Roof Frame
01010
01010
01010
03032
03032
802497
802632
800598
802633
(Assembled Leg)
800163
13345
800163
800163
13345
13345