SHARKOON 5-Bay RAID-Station - Manual (Page 2)

5-bay raid station 2
Content
1. Features 3
1.1 Overview 3
1.2 SATA features 3
1.3 USB features 4
2. Specifications 4
3. System requirements 4
4. The device at a glance 4
4.1 Rear panel 5
4.2 The LED indications 5
5. Package contents 7
6. Getting started 7
6.1 HDD installation 7
6.2 Power on/off 9
6.3 eSATA slot bracket installation 9
7. Configuration 10
7.1 Preparation 10
7.2 Changing the host connection 11
7.3 Disconnecting an USB device 11
7.4 HDD HotPlug 11
8. Setting the RAID mode 11
8.1 CLEAN mode 12
8.2 CLONE mode with HotSpare 13
8.3 R1 mode with HotSpare 16
8.4 R10 mode with HotSpare 18
8.5 R3 mode with HotSpare 20
8.6 R5 mode with HotSpare 23
9. Rebuilding a redundant or HotSpare drive 25
9.1 Rebuilding a redundant drive 26
9.2 Rebuilding a HotSpare drive 27
10. Troubleshooting 29
11. Appendix 30
11.1 CLEAN mode 30
11.2 LARGE mode 30
11.3 CLONE mode 31
11.4 R0 mode 32
11.5 R1 mode 32
11.6 R10 mode 33
11.7 R3 mode 34
11.8 R5 mode 35
