Rebel9 pro (economy, value and window) – SHARKOON Rebel9 Pro Window User Manual

Page 9

Text mode
Original mode

REBEL9 PRO (EcOnOmy, vaLuE and windOw)

6. Plug the connectors of the case’s front bezel to the respective connectors of the mainboard
(also refer to your mainboard’s manual for further information).

Note (Value and Window edition only):
The eSATA cable connected to the front eSATA connection should not exceed 50 cm of
length otherwise transmission errors may occur! With premium quality eSATA cables this
maximum length may be exceeded.

5. Installation of a PSU

1. Set up the case in front of you and put the PSU from the inside against the PSU bracket on
the case’s back side (fig. 5).

fig. 5

2. Screw the PSU to the case from the outside (fig. 6).

(Screws for PSU mounting)

fig. 6