SHARKOON X-Tatic Digital - Manual (Page 11)

X-TATIC DIGITAL
6.1.1 Volume / Dolby Pro Logic (VOL / PL)
Dolby Pro Logic is a Dolby technology which enables the transformation of a
2-channel signal into a 5.1-channel signal.
1. Toggle the switch (fig. 1 / A) into the “VOL / PL” position.
2. Activate / deactivate the Dolby Pro Logic function with the respective button (fig. 1 / B).
3. Adjust the volume using the buttons “Vol -” and “Vol +” (fig. 1 / C).
fig. 1
6.1.2 TD (Time-Delay)
The Time-Delay function allows to define a time delay for the sound reproduction of
each speaker. Thus a spacious playback of the audio signal can be achieved. Note that
increasing the delay too much may cause unnatural results.
6.1.3 DRC (Dynamic Range Control)
Dynamic Range control limits the dynamic, decreasing the level difference between
loud and quiet passages in a Dolby Digital 5.1 signal thus balancing the effect loudness.
6.1.4 Activating TD / DRC
1. Toggle the switch (fig. 2 / A) to the “TD / DRC” position.
2. Select the desired channel (center / surround) you wish to adjust using the TD function
switch (fig. 2 / B). Pressing the buttons “TD -” or “TD +” (fig. 2 / C) will set the
Time-Delay with “TD +” increasing its value and “TD -” decreasing it. A bigger delay
produces a more spacious feeling.
3. You may additionally activate / deactivate the DRC function by pressing the button
“Pro Logic / DRC” (fig. 2 /D).
fig. 2
The Sound Control Unit will keep all settings after shutdown. Changes to the
Time-Delay settings in Dolby Digital 5.1 mode will affect the settings in Dolby Pro
Logic mode and vice versa.
A
B C
A B
C
D